Â
'' Faulty Hardware Corrupted Page '' is a blue screen error which normally occurs due to memory corruption. It is one such error which could show up all of a sudden. As soon as the error message appears, the computer usually shuts down. Therefore, similar to other BSOD errors this too puts your data at risk.Â
And, there exists several reasons for this error to show up. If you are one of those who experience this problem, you're not alone. Many people reported to experience and sort out the issue. The below mentioned solutions should help you fix this error on your computer.
In this article, I will be describing about 10 Ways to Fix Faulty Hardware Corrupted Page in Windows. If this error prevents you from accessing the system, you can try using Safe mode.
Let's get started,
1. Check RAM
In most cases, faulty hardware is behind these types of blue screen errors. Especially, a malfunctioning RAM. Many users have reported that inspecting the RAM alone has proved to solve faulty hardware corrupted page error. It is best to remove the RAM and clean it with a piece of cloth.Â
When putting it back, ensure to place it firmly in its slot. If the error still persists, consider running the memory diagnostics tool to check potential issues in the RAM.
2. Perform CHKDSK
Check Disk Utility (CHKDSK) is a tool available to scan the hard drive for issues. The scan fixes most issues related to the disk. You can try performing CHKDSK on the partition where the operating system is installed.
To run CHKDSK,
- Insert the installation media
- Restart the PC
- Boot from the installation media
- Choose your language
- Press Shift + F10
- Type and press Enter after the command
3. Perform SFC Scan
If there are issues with your system files, there is also a possibility for this error to show up. Another potential way to solve this issue is by using the windows built in repair tool. You can perform the SFC scan to see if the problem goes away. Â
To run SFC Scan,
- Insert the installation media
- Restart the PC
- Boot from the installation media
- Choose your language
- Press Shift + F10
- Type and press Enter after the command
4. Update Driver
Incompatibilities in the system also cause blue screen errors. The hardware functioning of your computer is taken care entirely by the device drivers. If improper drivers are installed it could be one the reasons for faulty hardware corrupted page error. For this the recommended solution will be to install the latest drivers. With the latest drivers, most bugs and glitches are fixed allowing you to use the system without any errors.Â
5. Update BIOS
Basic Input Output System (BIOS) is one the firmware which continues PC functionality. An outdated BIOS can give rise to many problems including faulty hardware corrupted page error. Some users have reported to fix this error just by updating the BIOS.Â
Information about updating the BIOS is available in the motherboard manual. This process must be performed with extreme care.
6. Check Ventilation
Dust and other particles from the surroundings accumulate inside the computer preventing ventilation. As a result, excess heat could buildup inside the system leading to the faulty hardware corrupted page error. Hence, for fixing this BSOD you need to check if your computer is properly ventilated by cleaning each part individually. Particularly, be sure to clean the fan, heatsink, ports and other vents. If possible, change the thermal paste too.Â
7. Uninstall Apps
Certainly, third party applications can cause blue screen errors including faulty hardware corrupted page. Therefore, finding and uninstalling the app can solve this error. It can be challenging to find out the problematic software, if the seems to appear suddenly. In this case, you need to examine the recently installed apps.
8. Remove Peripheral Devices
When you have multiple peripheral devices connected, you might end up getting faulty hardware corrupted page error. Apart from major input devices, remove all others and restart the computer. If that fixes this error, you can try reconnecting each device. Do it one by one, until you find out the faulty device.
9. Disable Antivirus
Incompatibilities between the antivirus software and other applications can also trigger this error. Not only Antivirus, even the Firewall solutions. Hence, disabling the Antivirus software temporarily can fix this problem. If that worked, you should uninstall the problematic Antivirus and move with another one.Â
Remember, even if your computer doesn't have any third party Antivirus solutions it won't leave your system unprotected since Windows operating system comes with their built in Windows defender protection.
10. Reinstall Windows
Despite of following all the methods, you are still experiencing faulty hardware corrupted page error then its time for you to reinstall windows. Issues that cannot be normally sorted out by the CHKDSK and SFC scan can be fixed easily by reinstalling windows.Â
Beware that, if your operating system is installed on the C drive all the files stored on that drive will be deleted. Therefore, before this process make sure to back up important files.
No comments:
Post a Comment