7 Ways to Fix Server DNS Address Could Not be Found in Windows

Post Top Ad

Your Ad Spot

2.24.2022

7 Ways to Fix Server DNS Address Could Not be Found in Windows


7 Ways to Fix Server DNS Address Could Not be Found in Windows
Windows users have recently been experiencing a frustrating error on their google chrome browser.
That is the, 

'' Server DNS address could not be found ''

Every websites often use domain names to make things easier to remember. This process is much easier compared to numerical representation of IP address. 

Whenever a user tries to access a specific site, always the domain name is matched with the IP address. This is accomplished through the use of DNS servers. If this process fails, you will be presented with the error message. 

Now this error is not common to all the sites. Specific or even some popular sites are affected by this error. Even though this error appears like a complex issue, it is relatively easy to fix. Unless this issue does not lie in the webpage itself, troubleshooting this error is an easy process. 

In this article, I will be addressing about the 7 Ways to Fix Server DNS Address Could Not be Found in Windows. For the users who encounter this devastating error, this article deals with how to get rid of it.

Let's get started,


1. Use Public DNS


Another means to fix this error is by using the Public DNS servers. Most likely this issue is experienced when there is a problem with the current DNS server. For this Google comes up with their own Domain Name System (DNS) known as Public DNS. Using the server not only eliminates this error but also increases the speed and security. 

To use Public DNS,
  1. Go to Start 
  2. Type '' network connections ''
  3. Right click on the results and Select '' Properties ''
  4. Select '' Local Area Connection ''
  5. Press '' Properties ''
  6. Choose '' Use the following DNS server address ''
  7. Type - 8.8.8.8 for the preferred DNS server 
  8. Type - 8.8.4.4 for the alternate DNS server
  9. Check '' Validate Settings upon exit ''
  10. Press Ok

2. Flush DNS


Windows operating system uses DNS cache to store DNS entries and IP addresses related to a site. This is taken as a measure to increase the site loading speed. Despite its uses, it can also get corrupted leading to this error. If you suspect the DNS cache to cause errors like this, then the solution for this is flushing the DNS cache.

To flush DNS cache,
  1. Press '' Windows + R ''
  2. Type '' cmd '' Right click on it and Choose Run as Administrator
  3. Type the command and Press Enter
                              ipconfig /flush dns
                              ipconfig /renew


3. Clear Host Cache


If too many extensions and plugins are used in the chrome browser it can also be the reason for this error. In the long run, it is common for the host cache to get full. If this is the case, you can try clearing the host cache.

To clear host cache,
  1. Open Chrome browser
  2. Press Ctrl + Shift + N
  3. Go to the address bar and type,
                              chrome://net-internals/#dns

     4. Press '' Clear host cache '' button

Now close this tab and reopen the site giving you this error. By this you can check if you are still experiencing the same issue.


4. Try VPN


Some Internet Service Providers (ISPs) are known to block DNS of certain websites. This is because this websites do not allow visitors from restricted locations to enter their site. If the VPNs allow you to visit blocked sites by masking the IP address. For the problem of server DNS address could not be found, you can get rid of it by using the VPN. VPNs allow you to visit blocked sites by masking the IP address. 


5. Reset DNS Client Service


DNS Client Service is responsible for registering the company name and querying cached information. If for some reason the service is deactivated or corrupted, the programs connected to this service will also stop working. Restarting DNS client service allows a new connection to be reestablished. Thus, you will no longer be experiencing this error. 

To reset DNS client service,
  1. Press '' Windows + R ''
  2. Type '' services.msc ''
  3. Find DNS Client Service
  4. Right click on it and Press Restart

6. Update Network Drivers


Be aware that corrupt or incompatible drivers can also result in server DNS address could not be found error. So one way to fix this is by updating the network adapter drivers. There are two methods for you to update network drivers. Either that can be performed from manual or automatic updates. 

In this step of automatic updates, a driver software will be used to automatically search for latest relevant drivers and install them accordingly. If automatic updates are not available, you can try the option of manual updates. For this method, you need to visit the manufacturer's website.


7. Delete Extra Files


Extra files present in the etc folder can also trigger this error. The etc folder present in the C drive stores some unnecessary files that can restrict internet access. This folder is directly linked to the chrome browser. So deleting these files is a simple solution to fix server DNS address could not be found error.

To delete extra files,
  1. Open Windows Explorer
  2. Go to C drive → Windows → System32 → drivers → etc
  3. Delete all the files


No comments:

Post a Comment

Post Top Ad

Your Ad Spot

Pages